How to attach your patch!

You can attach your patch in two different ways, either by hand sewing around the edge of it or by using the iron-on adhesive on the back of your patch! You can add your patch to any material, try a denim jacket, tote bag or display your patches on a wall hanging!

Ironing on your patch is an easy, quick process and you'll only need an iron and a piece of scrap fabric/paper to protect the patch from the heat. Here's how to do it:

1. Preheat your iron to a medium heat with no steam.

2. Remove the paper backing from the adhesive side of the patch.

3. Place your patch in the desired area, making sure the surface is completely flat.

4. Place your scrap fabric or paper over the patch and hold the iron on each section for 6 second intervals, until the whole patch is bonded. Thick fabrics will need to be heated for longer.

5. Once the patch is bonded you can turn over the material and repeat the process on the back for extra security!